After the iron parts are removed the bulk is transported to a two-metre-wide eddy current separator there a powerful 12- or 22hi-pole rotor separates the non-ferrous metals from the bulk material the metal separator has a working width of 2000 mm this results in the case of shredded wood in a capacity of approximately 100 m.
After the iron parts are removed, the bulk is transported to a two-metre-wide eddy current separator.There, a powerful 12- or 22HI-pole rotor separates the non-ferrous metals from the bulk material.The metal separator has a working width of 2,000 mm.This results in the case of shredded wood in a capacity of approximately 100 m /hour.
An Eddy Current Separator consists of an outer drum, an internal magnetic rotor, a drive and belt conveyor.The magnetic rotor, which is positioned inside the non-conductive outer drum, revolves at around 3000 revolutions per minute during operation whilst the outer drum rotates at belt speed.
Aug 12, 2001 The strength of the magnetic flux (the eddy currents) is consistent across this width.Use it all – even when feeding the eddy current below its rated capacity, if the material is not distributed evenly across the working width, effective separation will not be achieved.An eddy current separator can process both wet and dry material.
Dings Magnetics Group manufactures magnetic and eddy current separators for separation of ferrous and non-ferrous metals in Recycling, Mining, Aggregate, Coal, Foundry, and Processing Industries.
EDDY CURRENT SEPARATION SYSTEMS - SCP A system for separating non-ferrous metals from inert materials, equipped with an eddy current separator fed by a vibrating screen for the proper .
Eddy Current Separator Operating Principles.The Eddy current separator starts with a short belt conveyor with a high speed magnetic rotor system installed at the discharge end and its drive located at the return end.The magnetic rotor is positioned within a separately rotating non-metallic drum.
Eddy current separator, non-ferrous metal separator is mainly used for recycling of non-ferrous metal.Typical material is: wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part ,non-ferrous metal scrap, dross for printing ,broken glass contains non-ferrous .
For Non-ferrous metals Overband-Overbelt Magnetic separator for Iron separation Cylinders mill for.Glass crushing Cable recycling system.And Wire stripper Cylinders press for Plastic.Bottles, Tetra-pak, Cans Grading machine and magnetic grate and for Iron separation Magnetic pulley and drum.
Eddy current separators are used to separate non-ferrous metals (aluminium, copper, brass,.The strong pulsating magnetic field and the high rotational speed guarantee best separation results.
Eddy current separators or eddy current separations mainly consist of magnetic pulley, short belt conveyor, drive motor and steel frame,etc as the most key parts, magnetic pulley is very special magnetic system that can generate alternating magnetic fiel.
When crossing a variable magnetic field, non-ferrous pieces of metals are exposed to repulsion forces that tend to make them jump away from the variable magnetic field source.Eddy Current Separators (ECS) are belt separators that take advantage of this physical principle.The head drum assembly of an ECS consists in an .
Flake Eddy Current Separator (ECS) Bunting’s clean, low-profile Eddy Current Separator uses Magnetic Finite Element Design to optimize the magnetic field, and maximize the focal point and strength of the gauss intensity.This results in the maximum separation of the flake material.
Goudsmit has been producing eddy current separators for many years.Market and customer wishes are focal points for the design of a robust, reliable machine line.How eddy current separators work.Eddy current separators have a conveyor belt system with a high-speed magnetic rotor at the end.
How does eddy current separator work? Eddy current separators respond to the problem of separating non-ferrous metals from municipal solid waste and depend on the ability of metals to conduct electrical current.If the magnetic induction in a material change with time, a voltage is generated in that material and the induced voltage produces a current called eddy current.
In eddy current separator there is a short belt of conveyors that has its drive located at the return end and a high-speed magnetic rotor system installed at the discharge end.A magnetic rotor, which is positioned within a separately rotating non-metallic drum, revolves high speed during operation whilst the outer drum cover rotates at the .
In eddy current separator there is a short belt of conveyors that has its drive located at the return end and a high-speed magnetic rotor system installed at the discharge end.A magnetic rotor, which is positioned within a separately rotating non-metallic drum, revolves high speed during operation whilst the outer drum cover rotates at the speed of the eddy currents belt conveyor.
INSPIREON Have developed Eddy current separators are commonly used to separate non-ferrous metals from mixed waste and other product streams.When a magnetic rotor is turned at high rates of speed, powerful forces called eddy currents are created.These eddy currents repel materials with varying degrees of force depending on their composition.
Jul 20, 2020 The Eddy Current Separator utilises magnetic forces to physically repel non-ferrous metals and enable a separation from non-metallic materials.
One, each Eddy Current Separator, to separate non-magnetic metals such as aluminum, copper, from other less dense material, such as plastic, complete including 12.75” diameter by 20” wide magnetic rotor with high speed rotating rare earth magnets, 20 In.Wide urethane belt to transport material, one 304 SS hopper with 1.
Our Eddy Current Separators are designed from the ground up to provide high recovery rates (97%+) and low operating costs.Eddy Current Separators are ideal for a range of applications, including: MRF (Material Recovery Facility’s), C&D, Incineration, Auto shredding, Electronics Recycling and more.
The CP Group supplies both eddy current and electromagnetic separators.The first is designed primarily for the extraction of aluminum cans from the wastestream.Utilizing a powerful rare earth magnetic drum enclosed in a heavy-duty frame, the CP Eddy Current Separator provides a durable, cost-effective solution to aluminum recovery.
The design of our new STEINERT EddyC combines things that have been tried and tested with innovation in the separation of non-ferrous metals.STEINERT also continues to rely on the established eccentrically mounted magnetic pole system with powerful neodymium-iron-boron magnets and robust construction of all machine elements in its eddy current separators.
The eddy current itself generates an alternating magnetic field, which is opposite to the direction of the magnetic field generated by the magnet rotor, that is, it generates a repulsive force (Lorentz force) on the metal, which separates the metal from the material flow and achieves the purpose of separation.
The Eddy Current Magnetic Separator divides the material through the use of a magnetic rotor, with alternating polarity, rotating at high speeds.The non-ferrous metal passes over the rotor and the alternating magnetic field creates an eddy current in the non-ferrous metal repelling the particle away from the conveyor, while the other material .
The Eddy Current separator uses a strong magnetic field to separate non-ferrous metals from waste.All ferrous metals are previously removed by an arrangement of magnets.Eddy currents, which are created by an rapidly rotating magnetic rotor, affect the trajectory of non-ferrous metals.
The eddy currents (also called Foucault’s currents) are generated by the machine’s magnetic rotor.An Eddy Current Separator mechanically resembles a conveyor belt and it is usually installed in line in a waste recycling plant.The main purpose of the machine is to separate the Non-ferrous metals from non-metals or, eventually, recover fine .
The eddy currents are induced in conductive particles due to a time-varying magnetic field.This results in repulsive forces.
The key component of the eddy current separator is the magnetic rotor, which has a series of permanent rare earth magnets mounted on a support plate attached to a shaft.The magnetic rotor is surrounded by (but not attached to) a wear shell which supports the conveyor belt.
The recovery of non-ferrous metals is the economic basis of every recycling system.STEINERT eddy current separators with an eccentric pole system optimally meet this requirement – it is no coincidence that more than 4,000 of them are in use worldwide convincing by their high extraction volumes and durability at the same time.
For more interesting content, please contact us online, we will reply to you as soon as possible.Start Your Project